1. 1
  2. 2
CLW5040XJCN5 test car picture

CLW5040XJCN5 type test car

简述
  • Contact: Li Meng
  • Contact number: 18908665555
  • Address: No. 7 West Drifshui Road, High-tech Zone, Suizhou City
Wholesale at factory price Genuine warranty Buy a car with confidence Drop off a car at your door After sale with care
High-definition picture
  • CLW5040XJCN5 test car picture
  • CLW5040XJCN5 test car picture
  • CLW5040XJCN5 test car picture
  • CLW5040XJCN5 test car picture
  • Announcement parameter
    

    Technical parameter

    Product name

    Inspection car 

    Overall dimensions (mm)

    5995×2250×3050 

    Vehicle type

    CLW5040XJCN5 

    Car/tank size (mm)

    ×× 

    Total weight (kg)

    4480 

    Tank volume (m3)

     

    Rated mass (kg)

     

    Front passenger

    3 

    Service weight (kg)

    4285 

    Maximum speed (km/h)

    120 

    Fuel/Environmental/exemption

    // 

    Fuel type

    柴油 

    Chassis parameter

    Chassis type

     NJ1045DFCZ  

    Chassis brand

     Iveco 

    轴数

     2 

    Front wheel base (mm)

     1695 

    Wheelbase (mm)

     3310 

    Rear wheel base (mm)

     1540,1754 

    Number of tires

     6 

    Tyre specification

     6.50R16LT 12PR,6.50R16LT 10PR,195/75R16LT 8PR,195/75R16LT 10PR 

    Approach departure Angle

     20/13 

    The front hangs and the back hangs

     1000/1685 

    Engine parameter

    Engine type

    Engine enterprise

    排量(ML)

    Power (ML)

    F1CE34818 SOFIM8140.43S5 

    Nanjing IVeco Automobile Co., LTD Nanjing IVeco Automobile Co., LTD 

    2998 2798 

    107 95 

    Other instructions

    ★ The car is equipped with a fault indicator tester,Electrostatic discharge generator,Surge group generator,Distribution terminal automatic tester and other equipment,Mainly used for circuit fault detection and test power grid;Optional shape color variation,The left and right sides and the back are skirt structures, Side elevation (mm):400, Rear ground height (mm):500,ABS system controller model :BOSCH ABS8, ABS system controller manufacturer: Bosch Auto Parts (Suzhou) Co., LTD。

    After-sales maintenance

    (1) The maintenance of the car chassis and supporting pumps shall be carried out according to the corresponding operating instructions。

    (2) The vehicle should be run in according to the requirements of the vehicle instruction manual before use。

    (3) Lubrication system maintenance: the vehicle needs to be cleaned and maintained once every 5000km-10000km, and it also needs to be cleaned and maintained once when the engine noise is too large, the acceleration is weak or the water temperature is too high。Cleaning the oil sludge and other deposits inside the engine can avoid the oxidation thickening of the oil at high temperature, which can effectively reduce the wear of the engine components, thereby extending the engine life and improving the engine power。

    (4) Cooling system maintenance: the vehicle should be cleaned and maintained once in the winter and summer seasons, I hope you clean and maintain once every 6 months to 8 months in normal driving, or clean and maintain once when the water temperature is too high, water leakage, and the pot。Remove traces and scale that cause the engine to overheat, prevent harmful corrosion, avoid and stop leakage of seals and water tanks, and completely replace the old coolant。

    (5) Fuel system maintenance: the vehicle needs to be cleaned and maintained once every 800km-1000km, or when you find the engine shivering, hysteresis and poor acceleration, black smoke, weakness, and fuel consumption。To remove the gum and carbon deposits inside the system, prevent harmful corrosion, avoid and stop leakage of seals and water tanks, and completely replace the old coolant。

    (6) Transmission maintenance: cleaning and maintenance once every 800km-1000km, or cleaning and maintenance once in case of transmission slip, high water temperature, slow shift, and system leakage。Remove harmful sludge and paint film deposits, restore the elasticity of the gasket and O-ring, make the gearbox shift smoothly, improve power output, and completely replace the old automatic transmission oil。

    (7) Power steering system maintenance: the vehicle needs to be maintained once every 1000km-2000km cleaning, or in case of steering difficulty system leakage, after replacing the power steering parts, it must also be cleaned and maintained once。Remove harmful sludge and paint film in the system, remove steering difficulties at low temperatures, stop and prevent leakage of power steering fluid, remove steering noise, and completely replace the old brake steering fluid。

    (8) Brake system maintenance: the vehicle is cleaned and maintained once every 800km, or when the ABS reaction is too early or too slow。Remove the harmful mud paint film in the system, remove the danger of working failure at ultra-high temperature or ultra-low temperature, effectively prevent the brake fluid deterioration and expiration, and completely replace the old brake fluid。

    Q&A

    (1) Free maintenance plan and period? 1、跟踪服务时间:终身; 2、在交客户使用之日起,Within the normal range of use,Free repair within 10000 km or within one year (excluding wearing parts and electrical parts),More than a year,只收取零件费; 3、服务到达时间:省内,Arrive within 24 hours;Other regions,二十四小时内派出人员; 4、每年防汛期间按排工程技术人员定期或不定期走访做到有故障及时排除,No fault active prevention。

    (2) Free post-accessory supply price method? 1、方式:在所在地技术服务站统一供货,根据用户要求由厂方直接发货; 2、配件只收工本费,不加其他费用。

    (3) after-sales service? The maintenance of the chassis can be done at a service station near the user's location。Distribution location, technical strength, contact information, please see the chassis Maintenance Manual。 Special equipment part of the maintenance, you can use telephone, fax contact information, the supplier after receiving the user's call 24-28 hours to send professional maintenance personnel to the use of the solution。

    (4) Technical training programmes? The supplier is responsible for free training of equipment users at the user's location before handing over the car to the user, mainly from the driver how to operate the hydraulic system and special devices to be familiar with the basic principle of this kind of car and the ability to deal with general faults。

    (5) We are from other places, can you send a car? The car purchase process stipulates that customers can order online and sign a car purchase contract。Advance deposit。Send the car to the customer's designated place within the specified time, and the customer will pay the full amount if the car passes the inspection。

    (6) The time to the factory to pick up the car? Pick-up time: Monday to Sunday, 08:00-19:00 (Some pick-up points work time is 9:00-18:00, in case of national holidays, press release holiday time shall prevail, please pay attention to it)

    Do we have a point of sale here?What if you want to see a car? Special vehicles are different from cars and other sales companies set up 4S stores across the country, which is determined by the particularity of special vehicles。Using the now developed business network, customers as long as the call letter to place an order, according to the purchase process of the car, will be in the contract within the time range of the vehicle and vehicle complete procedures handed over to the customer。We will be based on the actual needs of users, for each user to create high-quality, personalized special vehicles, you are welcome to visit the production strength and product process, we will provide you with the best service!